Welcome to Nanjing Golden Key Biotechnology Co., Ltd.!

Home page

Defoamer XCN-15AT for Chemical Pulping in Papermaking

　　1. Characteristics: Composed of specialty polysiloxanes, emulsifiers, dispersants, and stabilizers; maintains excellent defoaming and foam‑suppressing performance even at low concentrations; exhibits outstanding foam‑suppressing efficacy; demonstrates superior stability under moderately to highly alkaline conditions; readily disperses in water; exhibits good compatibility with foaming media; and inhibits microbial growth.
　　II. Typical Product Data Appearance: White or slightly yellowish milky liquid pH: 6.5–8.5 Solid Content: (15 ± 1.0)% Viscosity (25°C): 80–4,000 mPa·s Emulsion Ionic Type: Weakly Anionic Suitable Diluent: Thickening Water at 10–30°C Note: The above data are for reference only and do not constitute technical specifications.
　　III. Application Areas: Detergents; soy protein; defoaming in high‑temperature vacuum or pressure pulpers used in papermaking; defoaming and foam suppression in strong alkaline refining agents and pretreatment agents in the textile industry; defoaming and foam inhibition in high‑temperature, strongly alkaline chemical cleaning processes, as well as defoaming in high‑temperature, strongly alkaline aqueous systems; metalworking fluids;
　　IV. Instructions for Use This defoamer exhibits excellent defoaming and foam‑suppressing performance and can be added after foam has formed or incorporated into the product as a foam‑suppressing ingredient. Depending on the specific application, the dosage may range from 10 to 1,000 ppm; the appropriate addition level should be determined through customer‑specific testing. For use in papermaking pulping, a metering pump can be employed to dispense the defoamer directly upstream of the vacuum or pressure pulper to control foam. In chemical cleaning or the textile industry, it may be pre‑added to the formulation as a foam‑suppressing component or applied on‑site. This defoamer can be used undiluted or after dilution. If the system is well‑agitated and the defoamer is thoroughly dispersed, it may be added directly without dilution. If dilution is required, follow the dilution procedure outlined in the attached instructions. Directly diluting the product with water is not recommended, as this can lead to layering, emulsion breakdown, and other issues that compromise product quality. The company assumes no liability for any adverse consequences arising from direct water dilution or other improper processing or application methods.
　　5. Packaging and Storage This defoamer is packaged in 120‑kg plastic drums or 1‑ton containers. Custom packaging can be arranged upon request. Store this defoamer at 10–30°C; keep it away from heat sources and direct sunlight. Do not add acids, alkalis, salts, or other substances to the product. When not in use, seal the container tightly to prevent contamination by harmful microorganisms. If separation occurs after prolonged storage, stir thoroughly; this generally does not affect performance. In the event of freezing, allow the product to thaw completely before use; its effectiveness remains unchanged, though stirring is recommended. Store under standard chemical‑storage conditions. After use, ensure the container is tightly sealed to prevent degradation. Under the recommended storage temperature and in unopened packaging, the shelf life is six months from the date of manufacture.
　　VI. Product Safety This document has been prepared based on our company’s current knowledge and experience. The application or usage recommendations provided herein are for your reference only. If you cannot confirm the safety of use, please contact your distributor or our company directly. As the conditions and methods of using our products may vary, we recommend that customers conduct small-scale trial tests prior to full‑scale application to ensure safe and appropriate use. For product specifications, please contact our company; however, typical product data should not be construed as official product standards. We warrant that our products will conform to the applicable product standards in effect at the time of delivery. In the event of losses arising from non‑conformity with such standards, we shall be liable for refunding the purchase price or replacing the product. Upon request, we can provide a Chemical Safety Data Sheet. Please note that this document is subject to revision without further notice.

Keywords

Defoamer XCN-15AT for Chemical Pulping in Papermaking

This defoamer exhibits excellent defoaming and foam‑suppressing performance. In paper‑making pulping, it can be dosed via a metering pump to the vacuum or pressure pulper drum for effective foam control. In chemical cleaning and the textile industry, it may be pre‑added to the product as a foam‑inhibiting ingredient or applied on‑site.