Welcome to Nanjing Golden Key Biotechnology Co., Ltd.!

Home page

　　I. Characteristics: Composed of mineral oil, precipitated silica, polyether esters, and performance enhancers; exhibits excellent defoaming and foam‑suppressing efficacy even at low concentrations; demonstrates outstanding foam‑inhibiting performance.
　　II. Typical Product Data Appearance: Pale yellow to yellow oily liquid Solid content: 100% Viscosity (25°C): 80–3,000 mPa·s Note: The above data are for reference only and do not constitute technical specifications.
　　III. Application Areas: Coating and wastewater treatment; batik in the textile industry; cementing in the petroleum industry, water-based inks; adhesives;
　　IV. Instructions for Use This defoamer exhibits excellent defoaming and foam‑suppressing performance and can be added after foam has formed or incorporated as a foam‑suppressing ingredient into solid additive formulations. Depending on the application, the recommended dosage ranges from 10 to 1,000 ppm; the optimal level should be determined through testing based on the specific conditions. The product is ready for direct use; if it separates upon prolonged storage, simply stir before use—this will not affect its defoaming efficacy.
　　5. Packaging and Storage This defoamer is packaged in 25 kg plastic drums or 170‑kg cartons. Custom packaging can be arranged upon request. Store this product at 10–30°C; keep away from heat sources and direct sunlight. Do not add acids, alkalis, salts, or other substances to the product. If separation occurs after prolonged storage, stir thoroughly; this generally does not affect performance. Store under standard chemical‑storage conditions. After use, ensure the container is tightly sealed to prevent degradation. Under the recommended storage temperature and in unopened packaging, the shelf life is 12 months from the date of manufacture. 6. Product Safety This information is prepared based on our current knowledge and experience. The application and usage recommendations provided are for your reference only. If you cannot confirm the safety of use, please contact your distributor or our company directly. As conditions and methods of use may vary, we recommend conducting small‑scale trials prior to full‑scale application to ensure safe and effective use. For product specifications, please contact us; however, typical product data should not be construed as official product standards. We warrant that our products will meet the applicable product standards in effect at the time of delivery. In the event of losses arising from non‑compliance with such standards, we shall be liable for refunding the purchase price or replacing the product. We can provide a Chemical Safety Data Sheet upon request. Amendments to this document will be made without further notice.

Keywords

Non-silicone defoamer XP-205

This defoamer exhibits excellent defoaming and foam‑inhibiting performance and can be added after foam has formed or incorporated as a foam‑inhibiting component into solid additive products. Depending on the application system, the dosage of the defoamer ranges from 10 to 1,000 ppm; the specific amount should be determined through testing based on the customer’s particular conditions.